Steam can refresh many garments with less contact than ironing. Temperature, pressure and a protective cloth should match the fibre and finish.

Before smoothing clothing, check its instructions rather than selecting by fibre name alone. Compare iron and steamer separately with the recommendations. Lack of pressure does not itself prove steam is suitable for this item.

Read the exact marking

GINETEX's current 1/2/3-dot limits are 120/160/210°C. Check the complete marking and your garment instructions, especially ironing or steam prohibitions. Do not apply a new table to an unclear older label without clarification. Record the actual symbol variant you see.

Compare appliance settings

Read the iron or steamer manual and establish actual settings. A fibre name on the dial is insufficient to confirm compatibility. Check the appliance maker's steam, preparation and accessory instructions. Do not substitute a random distance from fabric for an unknown setting.

Plan around the details

Inspect decorations, buttons, zips, lining, lapels and intended pleats. Identify areas requiring different handling under the instructions. Do not create new creases or flatten decorative arrangements for a uniform surface. For a stain, establish appropriate care first; ironing does not replace assessment.

Check without increasing intensity

After finishing, examine surface and shape and complete preparation according to garment and appliance instructions. Do not automatically increase heat or steam for a remaining crease. Stop further attempts if sheen or arrangement changes and record the method. Assess a construction problem before further finishing. GINETEX Germany.

19/08/2026