Act promptly without rubbing. Blot, identify the stain and fibre, then use the least aggressive treatment allowed by the care label.

A spill calls for a measured response, not random chemicals. First limit the spread, identify the finished garment and record what happened. Then choose a method permitted for the whole item.

Stop the spread

Move the garment away from the spill. Lift excess liquid with a clean absorbent cloth, pressing lightly instead of rubbing; remove loose residue without pushing it into the weave. Place a clean cloth beneath the mark if you can safely reach the reverse.

Identify garment and mark

Note what may have caused the stain and when it happened. Read the finished garment’s label and check lining, finishings and trims. Take a photo before further treatment, especially if the substance or fibre is uncertain.

Avoid setting the problem

Do not apply hot water, bleach, solvent or an iron without checking suitability. Do not mix agents or scrub the same spot repeatedly. If the label or construction rules out local wetting, stop home trials.

Pass on the facts

For professional care, state the stain type, its age and every treatment already used. If the label permits washing, choose the next steps from it and the product directions, with a discreet test when appropriate. Check the result after drying before applying heat.

19/08/2026