Start ironing a skirt by identifying its construction: smooth panels, folds and pleats need correct positioning first. The label determines whether ironing is permitted and under what conditions. A fold’s appearance does not tell you how it was set.
Separate intended shape from accidental creasing
Spread out the skirt and inspect the hem and arrangement of folds. Do not try to remove every line: some belong to the design. With pleating, do not attempt to reconstruct a pattern you cannot identify. First establish whether the symbol permits ironing and whether additional manufacturer guidance applies.
Keep the lining clear of the panel
Check that no rolled lining, pocket bag or belt sits beneath the outer fabric. Do not stretch the seams joining layers. Reposition the skirt so the area being worked lies evenly. Avoid decorations and fastenings rather than pressing through metal or raised components.
Work in sections and watch the surface
Begin in an inconspicuous area at a permitted setting. Watch for changes in colour, sheen or texture. Use a pressing cloth or iron from the inside according to the particular model’s guidance. Do not replace those instructions with stronger pressure or a higher temperature.
Check the hem and slit
After repositioning, inspect the slit edges and hem. Make sure no section has accidentally been pressed underneath. If a fold remains, first correct the position and check the label’s limits. If the problem concerns lining, length or a seam, arrange an appropriate repair instead of repeated ironing attempts.