A practical editorial guide to ironing for shirts, covering preparation, decisions, common mistakes and ways to protect the garment or complete the look.

Ironing a shirt involves more than smoothing the front. The collar, cuffs, placket and sleeves need careful positioning, while the temperature must match the label for the complete garment.

Check the label and the iron

Read the ironing symbol. A crossed-out iron means do not iron; dots indicate the maximum soleplate temperature. Do not choose a setting solely because the shirt contains cotton or linen. Finishes, blends and decoration can affect the instructions. Check the guidance on steam as well.

Inspect the iron’s soleplate and the board cover. A dirty surface can leave a mark on a very visible part of the shirt. Keep the prepared garment clear of piles of clothing it might catch on as you reposition it.

Work in small sections

Lay the shirt so there is no folded second layer underneath the area being ironed. Start with a small, inconspicuous section and check how the surface responds. Fabrics prone to shine may need ironing from the inside or through a suitable pressing cloth, according to their instructions.

Align the edges of cuffs and collar first. As you move the shirt, straighten the placket and seams instead of setting an accidental fold with another pass. Avoid buttons and decorative elements. Position the sleeve as you want to wear it, with or without a crease, before ironing.

Assess the result before increasing the heat

If a crease remains, do not automatically raise the setting. Check the permitted temperature and moisture guidance for that shirt. Stop if its colour, sheen or texture changes. Ironing should not be used to disguise a mark that requires cleaning first.

Care-symbol reference: GINETEX symbol table.

19/08/2026