A practical editorial guide to ironing for wool garments, covering preparation, decisions, common mistakes and ways to protect the garment or complete the look.

Ironing a wool garment should address a specific issue, such as a storage crease or an unevenly laid section. Not every irregularity is a fault. Identify the weave, surface pile, trouser crease and lapel construction before applying an iron.

Check that ironing is permitted

The finished garment’s label determines the permitted treatment. Read any manufacturer instructions about steam and appliance settings too. If the instructions are unreadable or missing, ask about the specific model. A setting called “wool” does not settle the requirements of lining, finishes or decorations.

Separate the surface from the structure

Lay out only the section you are working on and support the rest of the garment. Move folded pocket bags, buttons and extra fabric layers out from underneath. On trousers, identify the original crease line first; on a blazer, do not turn a rounded lapel roll into a sharp fold. These details are not places to experiment with pressure.

Do not press harder for a quicker result

Woolmark advises against heavy pressure when ironing wool. Never leave the iron standing on the garment; prolonged contact can scorch wool. Use settings permitted for the product and check a small section before moving on. Do not iron over a stain or try to hide a shiny patch with repeated passes. Stop if the surface begins to look different.

Assess the result across the garment

Compare the treated area with an adjacent untouched section under similar light. Check for seam or pocket impressions and confirm that the intended shape remains. Damaged construction and felting need separate assessment; an iron cannot guarantee their repair. Further guidance: Woolmark — ironing wool.

19/08/2026