Before ironing a coat, make room for its length and weight. Collar, fastening, belt and lining may complicate positioning an individual section evenly. Read the label first: the word “coat” or its wool content alone does not determine a suitable temperature or confirm that steam is permitted.
Assess the problem across the coat
Check whether you are dealing with a storage crease, a turned-under hem or a change in a component’s shape. Examine the lining and where the unevenness begins. If fabric puckers along a damaged seam or the lining pulls up the hem, assess the cause first. Repeated passes with an iron do not replace a repair.
Support a long, heavy section
Do not let a part sliding off the board pull on your work area. Prepare clean support and reposition the garment before it starts slipping. Empty the pockets, organise the belt and check that a button has not ended up beneath the fabric. Positioning should give access to one area without crushing the remaining components.
Respect the collar and fastening shape
Do not automatically flatten the collar’s fold or set a new line. At the front, check the arrangement of the placket, lapels and fastening. Decorations or a different finish require their own care guidance. If you cannot separate the area to be ironed from such a component, stop and seek appropriate help.
Monitor the surface and hem
Work only within the instructions for that coat, observing sheen, colour and texture. Do not increase pressure simply because the fabric is thick. After repositioning, inspect the hem, vent and lining so no layer remains accidentally folded underneath. Assess the whole result before repeating the process; do not attempt to correct the coat’s length or fit through ironing.